N5242AS-285 2-port, 10 MHz – 26.5 GHz PNA-X Network Analyzer, 3.5 mm (m)

SpecificationsOption H85 is a special configuration of the PNA-X network analyzers, configured for high-power measurements. For low to medium power amplifier measurements, options 219 or 419 are recommended. Options 219 or 419 add source attenuators and bias tees to the network analyzer. However, bias tees limit the maximum test port input power to 30 dBm. So to meet the requirements of high power measurements, a special option has been created, option H85. H85 removes the bias tees between the source attenuators and the test port couplers. This extends the maximum port input power 43 dBm.
Maximum Frequency:
26.5 GHz

Dynamic Range:
127 dB

Output Power:
13 dBm

Trace Noise:
0.002 dBrms

Number of Built-In Ports:
2 or 4 ports

Harmonics:
-60 dBc

Noise Floor:
-114 dBm

Best Speed at 201 Point, 1 Sweep 6 ms

Network Analyzer Series
PNA-X Most Advanced and Flexible
Applications
S-Parameters
Noise Figure
Gain Compression
X-Parameters
Balance Measurements
Pulsed RF
IMD ComponentsAntennas
Mixers/Frequency Converters
Amplifiers BenchtopYes