FPL1007 Signal & spectrum analyser, 5kHz-7,5GHz, 40MHz signal analysis bandwidth, type N (f)

FPL1007 Signal & spectrum analyser, comes with:

• Frequency range of 5 kHz to 7,5 GHz
• 40 MHz signal analysis bandwidth (B40)
• Internal Generator 5 kHz – 7,5 GHz (B9)
• OCXO, precision frequency reference, aging/Year: < 1×10-7, Temp.-drift: < 1×10-7 (B4)
• 1 dB steps for the electronic attenuator (B25)
• RF preamplifier, 2 MHz to 7,5 GHz, Gain 20 dB (B22)
• Noise Figure and Gain Measurement (K30)
• Additional interfaces: User port, noise source control, power sensor, IF/video/demod out, AF output, plug-in unit (B5)

The FPL spectrum analyser makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With solid RF performance, light weight and small footprint, the FPL combines the functions of a benchtop instrument with the portability of a handheld instrument. In an RF lab, the FPL is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
Features:

• Low spurious response, Within 10 MHz offset from the carrier signal >> –70 dB lower than the signal level.
• Low displayed average noise level (DANL), typical –152 dBm, can be improved to –166 dBm with a preamplifier
• Low level measurement uncertainty of 0,5dB (< 0.3 dB for +20 °C to +30 °C)
• Low phase noise of –108 dBc (1 Hz) at 10 kHz offset to the 1 GHz carrier 

The FPL spectrum analyzer can be used almost everywhere. With a depth of only 23 cm, it fits into any workplace and leaves enough space for DUTs and other measuring instruments. Its low weight of 6 kg and carrying handle mean you can take it wherever you need it.