Fabrikant: Chauvin Arnoux
CA8336 Power Quality & Energy Analyzer w. Current Probes
- The ESSAILEC cable can be used to carry out tests without disturbing or interrupting the power supply circuit on the meters and the protection relays installed in the secondary circuits of current or voltage transformers.
- Reeling Box
This practical magnetized winder equipped with the MultifFIX system allows you to adjust the length of your cables. It can be opened so that users can install banana-type leads for voltage measurements or MiniFlex® MA193-250 flexible sensors for current measurements. It also provides a simple means of stowing your cables. - PA31ER adapter
This enables self-powering of the Qualistar+ via the phase from 100 V to 1,000 V, AC or DC. It is connected directly to the voltage inputs and is:
IP53
IEC 61010 CAT III 1,000 V / CAT IV 600 V. - All the Qualistar+ models are delivered with a set of rings/inserts for quick identification and customization of the colour coding for each country.
- Large choice of current sensors for current measurements from 5 mA to 10 kA
Technical specifications:
- TRMS AC+DC voltage up to 1,000 V
- TRMS AC+DC current: 5 mA to 10 kA depending on the sensors
- Frequency
- Power values: W, VA, var, VAD, PF, DPF, cos f, tan f
- Energy values: Wh, varh, VAh, VADh, BTU, toe, Joule,
- Harmonics from 0 to the 50th order, phase
- Transients: up to 210
- Inrush with waveform over a period > 10 minutes
- TrueInrush function
- Recording of a selection of parameters at the maximum sampling rate for several days to several weeks
- Alarms: 10,000 of 40 different types
- Peak detection
- Vectorial representation
- Available in more than 27 languages
- IP53 / IK08
- USB communication
- IEC 61000-4-30 Class B
- Dimensions / weight: 240 x 180 x 55 mm / 1.9 kg
50+ jaar ervaring
in de test- en meetverhuurmarkt
Experts beschikbaar
Vragen? Bel ons:
+32 25 32 32 32
Snelle levering
99% van de producten zijn op voorraad in ons magazijn
Beveiligd betalen
Veilig en gemakkelijk betalen
