534914 OSLT Compact calibration kit, 44GHz, 2,92mm(f), 50 Ohm

Spinner BN: 534914 Open / Short / Load / Through (OSLT)  Compact calibration kit (4-in-1), DC-44 GHz, 2,92 mm (female), 50 Ohm

The OSLT compact calibration kit (4-in-1) DC-44 GHz 2,92 mm female has a characteristic impedance of 50 Ohm.
It is characterised by very low VSWR and attenuation values as well as best intermodulation properties in the entire operating frequency range from DC to 44 GHz.
The test kit has 5 interfaces with 2,92 mm female.

This product has gold-plated connections and is based on the better quality classes of the IEEE, ICE standards with regard to lower tolerances.
SPINNER also uses the term ‘precision’ here to emphasize the suitability for exceptionally high-precision measurements.

The 2,92 mm coaxial connector is a reliable connector system that works up to approx. 40 GHz and is used in RF measurement laboratories, on high power components, calibration and verification standards.
It is also known as a Type-K connector. A 2,92 mm coax interface can be mechanically mated with 3,5 mm and SMA connector systems, but the connection creates a signal reflection that must be considered.
It was the predecessor of the 1.85 mm connector size. Compared to the 3,5 mm connector system, the 2,92 mm interface has a shorter inner conductor pin that allows the outer conductor to be aligned before the inner conductor makes contact.
Therefore, the 2,92 mm connector is less susceptible to damage in industrial use.